# hw
* [arm/mipsel/x86 packages](#armmipselx86-packages)
* [Mi](#mi)
* [iKuai](#ikuai)
* [UBNT](#ubnt)
* [UNMS](#unms)
* [ER-X](#er-x)
* [Reset](#reset)
* [Console](#console)
* [bootloader](#bootloader)
* [Firmware](#firmware)
* [OpenWRT](#openwrt)
* [custom scripts](#custom-scripts)
* [Web Setup Wizards](#web-setup-wizards)
* [Switch](#switch)
* [CLI](#cli)
* [add bridge](#add-bridge)
* [enable apt](#enable-apt)
* [List dhcp/static clients](#list-dhcpstatic-clients)
* [RIP](#rip)
* [Unifi](#unifi)
* [Unifi-AC-Lite/LR](#unifi-ac-litelr)
* [Controller Web](#controller-web)
* [NanoStation® M](#nanostation-m)
## arm/mipsel/x86 packages
```
tar zxvf *.ipk / *.tar.gz
```
* Pure:
* for CN:
* Lean/LEDE/iStoreOS:
* 200+ : |
* eSir:
* Lenyu: \_
* Raspberry Pi & NanoPi R2S/R4S & G-Dock & x86 OpenWrt:
## Mi
MIWIFIRepairTool:
## iKuai
* mem : 32bit 512M / 64bit 2G | HDD 1G most for log |
* defaults: 1st port LAN | admin/admin
* allow WAN web： /login#/equipmentSetting/loginManagement
* cloud qr: /login#/equipmentSetting/cloudServiceBinding
* dhcp hostname: /login#/networkConfiguration/internalAndExternalNetworkSettings/editLanWan
* v4 : ovpn yes | wg ent only
## UBNT
### UNMS
curl -fsSL > /tmp/unms\_inst.sh && sudo bash /tmp/unms\_inst.sh
## ER-X
```
system type : MT7621
processor : 3
cpu model : MIPS 1004Kc V2.15
BogoMIPS : 583.68
wait instruction : yes
microsecond timers : yes
tlb_entries : 32
extra interrupt vector : yes
hardware watchpoint : yes, count: 4, address/irw mask: [0x0ffc, 0x0ffc, 0x0f fb, 0x0ffb]
isa : mips1 mips2 mips32r1 mips32r2
ASEs implemented : mips16 dsp mt
```
### Reset
Reset button for about 10 seconds until the eth4 LED flashing/solid. default: static | (eth0)
### Console
Pinout:
My TTL cables: green/red/yellow/grey | Putty: 57600 8-N-1
(>100M)
```
The baud rate for ER-X / ER-X-SFP / ER-10X and EP-R6 console connections is 57600 instead of 115200.
Hold down the 1 (number one) key as the router starts up
1: System Load Linux to SDRAM via TFTP.
Please Input new ones /or Ctrl-C to discard
Input device IP (172.16.3.212) ==:192.168.1.20
Input server IP (172.16.3.210) ==:192.168.1.10
Input Linux Kernel filename (vme50) ==:ER-e50.recovery.v2.0.6.5208541.190708.0508.16de5fdde.img
```
### bootloader
```
show system boot-image
add system boot-image
```
### Firmware
```
show version
add system image http://dl.ubnt.com/...
add system image egdeos-120821.tar
show system image
reboot
show system image storage
set system image default-boot
delete system image
set interfaces ethernet eth1 address 192.168.3.2/24
commit
```
#### OpenWRT
### custom scripts
```
chmod +x /config/scripts/post-config.d/yourscript.sh
#!/bin/bash
```
### Web Setup Wizards
#### Switch
```
switch switch0 {
address dhcp
switch-port {
interface eth0 {
}
interface eth1 {
}
interface eth2 {
}
interface eth3 {
}
interface eth4 {
}
}
}
```
### CLI
```
ubnt@ubnt:~$ configure
[edit]
ubnt@ubnt# show
```
#### add bridge
```
# WebUI: remove eth3 from switch0
set interfaces bridge br2 address dhcp
set interfaces ethernet eth3 bridge-group bridge br2
commit; save
# WebUI Dashboard: manage bridge/add ports
```
#### enable apt
```
configure
set system package repository wheezy components 'main contrib non-free'
set system package repository wheezy distribution wheezy
set system package repository wheezy url http://http.us.debian.org/debian
commit
save
exit
sudo apt-get update
apt-cache search supervisor
```
#### List dhcp/static clients
```
set service dhcp-server hostfile-update enable
cat /etc/hosts
```
#### RIP
```
ubnt@ubnt# show protocols rip
interface switch0
interface eth0
neighbor 192.168.3.1
redistribute {
connected {
}
}
```
## Unifi
* `UniFi Network Server` / `UniFi OS Server`: Software you install on your own server (VM/bare metal) to run `UniFi OS`
* `UniFi Network Application`: A key application within `UniFi OS`
Versions:
* UniFi OS Server 5.0.6 | UniFi Network 9.5.21 | Win/Mac/Linux
* UniFi Network Application 10.0.160
### Unifi-AC-Lite/LR
```
system type : Qualcomm Atheros QCA956X rev 0
processor : 0
cpu model : MIPS 74Kc V5.0
BogoMIPS : 385.84
wait instruction : yes
microsecond timers : yes
tlb_entries : 32
extra interrupt vector : yes
hardware watchpoint : yes, count: 4, ...
ASEs implemented : mips16 dsp
BZ.v3.7.5# free -m
total used free shared buffers
Mem:(Lite) 126316 62272 64044 0 0
-/+ buffers: 62272 64044
Mem:(LR) 126272 66764 59508 0 0
-/+ buffers: 66764 59508
Swap: 0 0 0
BZ.v3.7.5# info
BZ.v3.7.5# set-inform http://unifi:8080/inform
```
### Controller Web
```
Settings - Sie DEVICE AUTHENTICATION
Every minor setting change on controller causes SSID reset.
```
### NanoStation® M
---
# Agent Instructions: Querying This Documentation
If you need additional information that is not directly available in this page, you can query the documentation dynamically by asking a question.
Perform an HTTP GET request on the current page URL with the `ask` query parameter:
```
GET https://book.ferro.pro/nw/hw.md?ask=
```
The question should be specific, self-contained, and written in natural language.
The response will contain a direct answer to the question and relevant excerpts and sources from the documentation.
Use this mechanism when the answer is not explicitly present in the current page, you need clarification or additional context, or you want to retrieve related documentation sections.